Effect of MK‐467 on organ blood flow parameters detected by contrast‐enhanced ultrasound in dogs treated with dexmedetomidine

ObjectiveTo evaluate the dexmedetomidine‐induced reduction in organ blood flow with quantitative contrast‐enhanced ultrasound (CEUS) method and to observe the influence of MK‐467 on such reduction.Study designRandomized cross‐over study.AnimalsSix adult purpose‐bred laboratory beagle dogs (mean body weight 15.3 ± 1.9 kg).MethodsContrast‐enhanced ultrasound was performed on six conscious healthy laboratory beagles. The animals on separate occasions underwent three treatments: awake without any medication (CTRL), dexmedetomidine 10 μg kg^?1 (DEX) and DEX + MK‐467 500 μg kg^?1 (DMK) intravenously (IV). The kidney (10–15 minutes post‐treatment), spleen (25–30 minutes post‐treatment), small intestine (40–45 minutes post‐treatment) and liver (50–55 minutes post‐treatment) were examined with CEUS. A time curve was generated and the following perfusion parameters were analysed: arrival time (AT), time to peak from injection (TTPinj), peak intensity (PI) and wash‐in rate (Wi). In addition to CEUS, renal glomerular filtration rate was indirectly estimated by the rate of iohexol elimination.ResultsAT and TTPinj were significantly higher for DEX than for CTRL in all studied organs. The same parameters were significantly higher for DEX than for DMK in the kidney, spleen and small intestine. PI was significantly lower for DEX than for CTRL or DMK in the kidney. Wi was significantly lower for DEX than for CTRL or DMK in the kidney and significantly lower than for CTRL only in the small intestine. Plasma concentration of iohexol was significantly higher after DEX than CTRL administration.ConclusionsContrast‐enhanced ultrasound was effective in detecting DEX‐induced changes in blood flow. MK‐467 attenuated these changes.Clinical relevanceClinicians should consider the effects of the sedation protocol when performing CEUS. Addition of MK‐467 might beneficially impact the haemodynamic function of sedation with alpha‐2 adrenoceptor agonists.     

Effects of biological soil crusts and drought on emergence and survival of a Patagonian perennial grass in the Monte of Argentina

Biological soil crusts are widely distributed in arid and semiarid regions. They have an important eco- logical role, especially by modifying physical and chemical properties of soils. Biological crusts may also modify seed germination and seedling establishment. The effects vary widely according to the type of crust and the vas- cular plant species. The objective of this study was to determine the effect of moss-dominated biological soil crusts on the emergence, biomass and survival of Poa ligularis Nees ex Steud. under different irrigation regimes. We col- lected seeds of P. ligularis and biological soil crusts composed of two species of mosses： Syntrichia princeps （De Not.） Mitt and Ceratodon purpureus （Hedw.） Brid. from an area in the Monte of Argentina. The result showed that seedling emergence of P. ligularis was higher in treatments with bare soil than in soil covered by crusts, and also in those with watering to field capacity. Mean emergence time was higher in treatments with bare soil and watering to field capacity. Seedling biomass also showed significant differences between treatments. These results suggest that biological soil crusts dominated by mosses do not promote P. ligularis emergence, although they would not affect its survival.     

Chemical Composition of Cloud Water in the Puerto Rican Tropical Trade Wind Cumuli

In this biological oxygen demand (BOD) study, the manometric respirometric BOD OxiTop® method was used to monitor the biodegradation of two summer grade (SFO 1 and 2) and two winter grade light fuel oils (WFO 1 and 2) in OECD 301 F conditions, in groundwater, and in two different Finnish forest soils (mineral-poor and mineral-rich). The biodegradation measurements in the OECD 301 F conditions were carried out in two nutrient solutions for 28 days. In both solutions WFO 1 reached the highest biodegradation degree, 32% in the solution OECD 301 F, and 70% in a solution containing additional ammonium chloride. In groundwater conditions all the biodegradation degrees of fuel oils remained below 2% within the 28-day period. SFO 1 reached the highest 30 day biodegradability (4%) in mineral-poor soil, 18% in mineral-rich soil. In a 189-day measurement in a mineral-rich soil, the biodegradation degree for the SFO 1 was 94%. The manometric respirometric method proved to be a very suitable and practicable measurement method for the purpose of biodegradation studies of highly volatile light fuel oils, because in this method samples are treated to a lesser degree than in conventional methods, and dilutions are not needed. Results also indicated a considerable effect of conditions on the biodegradability in both water and soil environments. The results of these biodegradation studies could be used when planning in situ treatment methods based on natural biodegradation. In situ treatment methods are eco-efficient, and are especially suitable for sparsely populated sites.     

Activated Biochar as an Effective Sorbent for Organic and Inorganic Contaminants in Water

Adsorption is acknowledged as effective for the removal of pollutants from drinking water and wastewater. Biochar, as a widely available material, holds promises for pollutant adsorption. So far, biochar has been found to be effective for multiple purposes, including carbon sequestration, nutrient storage, and water-holding capacity. However, its limited porosity restricts its use in water treatment. Activation of biochars, when performed at a high temperature (i.e., 900 °C) and in the presence of certain chemicals (H₃PO₄, KOH) and/or gases (CO₂, steam), improves the development of porosity through the selective gasification of carbon atoms. Physicochemical activation process is appropriate for the production of highly porous materials. As well, the morphological and chemical structure of feedstock together with pyro-gasification operating conditions for the biochar production can greatly impact the porosity of the final materials. The effectiveness of activated biochar as adsorbent depends on porosity and on some functional groups connected to its structure, both of these are developed during activation. This study provides a comprehensive synthesis of the effect of several activated biochars when applied to the treatment of organic and inorganic contaminants in water. Results show that high aromaticity and porosity are essential for the sorption of organic contaminants, while the presence of oxygen-containing functional groups and optimum pH are crucial for the sorption of inorganic contaminants, especially metals. Finally, although activated biochar is a promising option for the treatment of contaminants in water, further research is required to evaluate its performance with real effluents containing contaminants of emerging concern.

Open image in new window

Graphical abstract ?

     

Gaseous and PM10-Bound Pollutants Monitored in Three Sites with Differing Environmental Conditions in the Venice Area (Italy)

Understanding and controlling air pollution in highly populated areas is very important, although interpreting the levels of gaseous pollutants and airborne particulate matter is complicated by dominant natural and anthropogenic emissions, micro-meteorological processes, and chemical reactions which take place directly in the atmosphere. For this reason, it is very difficult to relate the characteristics of air pollution to one or more specific emission sources. The aim of this paper is to detect associations among elements and organic compounds emitted from specific sources by means of chemical analyses, statistical processing of data, seasonal evolution study, and geochemical considerations to trace their origin. A detailed characterization of air quality during the period September 2000–September 2001 was carried out in three locations of the Venice region: A heavy traffic urban site, a public park, and the island centre of the city of Venice. Twenty-eight inorganic elements, four polycyclic aromatic hydrocarbons, CO and benzene were quantified and processed by a statistical procedure based on factor analysis considering variations on a seasonal basis. Results show the presence of associations between elements and compounds with the same behaviour in all sampling points. This indicates that several pollutants originate from a common source, and are then “diluted” throughout the study area, maintaining the imprint of their origin. Pt, polycyclic aromatic hydrocarbons, CO and benzene originating from the exhaust gas of vehicles are all linked in the traffic factor, whereas Cd is associated with Se, having a common source in industrial processes.     

Toxicity of Diflubenzuron and Temephos on Freshwater Fishes: Ecotoxicological Assays with Oreochromis niloticus and Hyphessobrycon eques

Water, Air, & Soil Pollution - Triclosan (TCS) is a potential endocrine-disrupting compound (EDC), which produces an adverse impact on aquatic life and human beings. Wastewater discharge is...     

Integrated approach of multiple environmental datasets for the assessment of sediment contamination in marine areas affected by long-lasting industrial activity: the case study of Bagnoli (southern Italy)

Purpose

The Bagnoli’s brownfield site (southern Italy) is an environmental priority for the Italian Government and is currently considered as a case study for the definition and application of innovative approaches to ecosystem recovery after a prolonged pollution history and eventual steel plant decommissioning.

Materials and methods

Here, we analyse high-quality datasets that constrain the distribution patterns and sources of contaminants in the coastal zone facing the site where the steel plant operated for almost one century. Innovative statistical approaches provide new insights into the temporal and spatial distribution of anthropogenic impacts, documented over the last 30 years, following lines of evidence emerging from investigations on grain size, TOC, heavy metals, PAHs, PCBs and high-resolution morpho-bathymetric information.

Results and discussion

The results derived from statistical analysis, referred also to the seafloor morphological variability, highlighted the presence of recent disposal of highly contaminated sediments and their potential pathways of dispersion to wider and deeper water zones.

Conclusions

The adopted multidisciplinary approach yields fundamental information towards an effective and proper ecosystem recovery of highly contaminated marine coastal areas and provides at the same time, a sound base for the refitting of decommissioned industrial plants.